Honeywell Cross-Reference

Replacing a Honeywell EARD6TZ

The Hoyme HAC-0610-OPO replaces the Honeywell EARD6TZ 6 in. fresh air damper. It fits the same 6 in. round duct, runs on the same 24 Vac, and works the same way: power drives it open, and a spring closes it when power is removed.

Buy the HAC-0610-OPOFind a wholesaler

Side by side

EARD6TZ and HAC-0610-OPO

Honeywell figures are from Resideo's published literature. The HAC is CSA certified for Canada and the USA.

Honeywell EARD6TZ vs. Hoyme HAC-0610-OPO
Spec Honeywell EARD6TZ Hoyme HAC-0610-OPO
Type Fresh air damper, round Motorized inline air damper, round
Duct size 6 in. 6 in.
Action Power open, spring close Power open (PO), spring close
Supply 24 Vac 24 Vac
Open signal LED on the optional M4 wire End switch version, HAC-0610-SPO
Service parts Replacement actuator, M847D-VENT Field-replaceable motor, microswitch and spring kits

Sources: Resideo ARD and EARD Series Damper submittal sheet and M847D actuator specifications; Hoyme HAC product information.

Controls and wiring

Will it work with what is already there?

The EARD6TZ and the HAC-0610-OPO both power open on 24 Vac and spring closed when power is removed, so whatever ran the EARD6TZ runs the HAC the same way. That is usually an IAQ thermostat, a ventilation control or a wall switch.

If the damper is part of a ventilation interlock, Hoyme's ADP relay adaptors and the colour wiring diagrams in the Technical Library cover the common setups.

Before you order

Four checks before you swap it

  • Confirm the size. The number in the model is the duct diameter, so the EARD6TZ is 6 in. If the label reads EARD6TZ/U, it is the same damper; /U is a packaging suffix.
  • Keep the action. The EARD6TZ is power open, so order the -OPO ending, not -OPC.
  • Need to prove the blade is open? The end switch version, HAC-0610-SPO, confirms the blade has reached open before another device, such as an exhaust fan on a proving adaptor, is allowed to run.
  • Damper in an unheated attic or crawlspace? The insulated HAC-0610-OPO-L is built for locations where a bare damper body sweats. It insulates the damper body only, so the duct run still needs insulation to code.

Order options

Hoyme part numbers in 6 in.

6 in. power open options
Part number Version Use it for
HAC-0610-OPO Standard Most replacements
HAC-0610-SPO End switch Proving adaptors and interlocks that wait for the blade to open
HAC-0611-OPO Relay Switching a second device, such as the furnace fan, when the damper opens
HAC-0610-OPO-L Insulated body Unconditioned space where condensation is a risk

Hoyme dampers are sold through HVAC wholesalers across Canada, or you can order direct here. See how to buy.

More replacements

Other Honeywell models

Equivalent means the Hoyme damper matches the Honeywell damper's duct size, action and supply voltage. The two are not identical in construction, performance, listing or certification. Confirm the application, the control sequence and the requirements of the authority having jurisdiction before substituting any product. Honeywell Home and TrueZONE are trademarks of Honeywell International Inc., used under license by Resideo Technologies, Inc. Hoyme Manufacturing Inc. is not affiliated with, endorsed by or sponsored by Honeywell or Resideo. Model numbers are used only to identify the product being replaced. Honeywell specifications are taken from published Resideo literature as of November 2026 and are subject to change.

Not sure which version you need?

Call with the old model number and what the damper connects to. We will confirm the size, the action and the interlock before you order. Free for contractors, installers and wholesalers.

1-800-661-7382