Honeywell Cross-Reference
Replacing a Honeywell EARD5TZ
The Hoyme HAC-0510-OPO replaces the Honeywell EARD5TZ 5 in. fresh air damper. It fits the same 5 in. round duct, runs on the same 24 Vac, and works the same way: power drives it open, and a spring closes it when power is removed.
Buy the HAC-0510-OPOFind a wholesalerSide by side
EARD5TZ and HAC-0510-OPO
Honeywell figures are from Resideo's published literature. The HAC is CSA certified for Canada and the USA.
| Spec | Honeywell EARD5TZ | Hoyme HAC-0510-OPO |
|---|---|---|
| Type | Fresh air damper, round | Motorized inline air damper, round |
| Duct size | 5 in. | 5 in. |
| Action | Power open, spring close | Power open (PO), spring close |
| Supply | 24 Vac | 24 Vac |
| Open signal | LED on the optional M4 wire | End switch version, HAC-0510-SPO |
| Service parts | Replacement actuator, M847D-VENT | Field-replaceable motor, microswitch and spring kits |
Sources: Resideo ARD and EARD Series Damper submittal sheet and M847D actuator specifications; Hoyme HAC product information.
Controls and wiring
Will it work with what is already there?
The EARD5TZ and the HAC-0510-OPO both power open on 24 Vac and spring closed when power is removed, so whatever ran the EARD5TZ runs the HAC the same way. That is usually an IAQ thermostat, a ventilation control or a wall switch.
If the damper is part of a ventilation interlock, Hoyme's ADP relay adaptors and the colour wiring diagrams in the Technical Library cover the common setups.
Before you order
Four checks before you swap it
- Confirm the size. The number in the model is the duct diameter, so the EARD5TZ is 5 in. If the label reads EARD5TZ/U, it is the same damper; /U is a packaging suffix.
- Keep the action. The EARD5TZ is power open, so order the -OPO ending, not -OPC.
- Need to prove the blade is open? The end switch version, HAC-0510-SPO, confirms the blade has reached open before another device, such as an exhaust fan on a proving adaptor, is allowed to run.
- Damper in an unheated attic or crawlspace? The insulated HAC-0510-OPO-L is built for locations where a bare damper body sweats. It insulates the damper body only, so the duct run still needs insulation to code.
Order options
Hoyme part numbers in 5 in.
| Part number | Version | Use it for |
|---|---|---|
| HAC-0510-OPO | Standard | Most replacements |
| HAC-0510-SPO | End switch | Proving adaptors and interlocks that wait for the blade to open |
| HAC-0511-OPO | Relay | Switching a second device, such as the furnace fan, when the damper opens |
| HAC-0510-OPO-L | Insulated body | Unconditioned space where condensation is a risk |
Hoyme dampers are sold through HVAC wholesalers across Canada, or you can order direct here. See how to buy.
Equivalent means the Hoyme damper matches the Honeywell damper's duct size, action and supply voltage. The two are not identical in construction, performance, listing or certification. Confirm the application, the control sequence and the requirements of the authority having jurisdiction before substituting any product. Honeywell Home and TrueZONE are trademarks of Honeywell International Inc., used under license by Resideo Technologies, Inc. Hoyme Manufacturing Inc. is not affiliated with, endorsed by or sponsored by Honeywell or Resideo. Model numbers are used only to identify the product being replaced. Honeywell specifications are taken from published Resideo literature as of November 2026 and are subject to change.
Not sure which version you need?
Call with the old model number and what the damper connects to. We will confirm the size, the action and the interlock before you order. Free for contractors, installers and wholesalers.
