RADP - 0241 - S10A (24Vac coil - 120Vac Contacts

RADP - 0241 - S10A (24Vac coil - 120Vac Contacts - with switch and receptacle)

HMI Interface Relay Adaptors

HMI Hoyme RADP- 0241- S10A

This Interface Adaptor comes with one relay having a 24Vac Coil and 120Vac contacts together with a split Duplex Receptacle. This Adaptor with an on/off switch functions as a control centre to supply 120Vac for a plug-in type gas dryer and is INTERLOCKED with the combustion air damper(HOM-0x12-SF2) proving it to be open before dryer operates. It can also be used to operate a replacement air damper and turn on the furnace fan to assist with air movement during the drying cycle.

Installation Instructions - Printer friendly (pdf)

Colored Wiring Diagrams used with the RADP-0241-S10A

#8A3. Forced air furnace with Combustion air damper which also supplies replacement air for 120 Vac Gas Dryer

#8A4. Forced Air Furnace having a combustion air supply duct and also a replacement air duct(PC) that serves as an air supply for a 120Vac gas dryer.

#8A5. Forced Air Furnace having a combustion air supply duct and also a replacement air duct(PO) that serves as an air supply for a 120Vac gas dryer.

#8A6. Forced air furnace with MAC air damper which also supplies replacement air for 120 Vac gas dryer.

#8A7. Forced Air Furnace having a MAC air supply duct and also a replacement air duct(PC) that serves as an air supply for a 120Vac gas dryer.

#8A8. Forced Air Furnace having a MAC air supply duct and also a replacement air duct(PO) that serves as an air supply for a 120Vac gas dryer.

Last Updated (Tuesday, 24 July 2012 10:14)

"Putting a Damper on Cold Air"

RADP - 0241 - S10A (24Vac coil - 120Vac Contacts - with switch and receptacle)