|
This Relay Adaptor may be used as an automatic switch having a 24Vac coil and 120Vac contact points to control a line voltage circuit for a 5 amp draw. i.e. Exhaust Fan. Adaptor can also be used 100% for 24Vac switching (See ADP-1101-05A). Switching 24Vac dampers and thermostat circuits use ADP-0242-05A type only and for 120Vac fan control, use ADP-0241-10A type only.
Installation instructions - Printer friendly (pdf)
Colored Wiring Diagrams used with the ADP-0241-05A
#6A6.Vent switch, replacement air - power open, interconnected with exhaust fan, heating cycle and/or cooling cycle.
#6C2. Vent switch, replacement air - power open, interconnected with exhaust fan, heating cycle and/or cooling cycle.
#6C3. Vent switch, replacement air - power open, interconnected with exhaust fan, heating cycle and/or cooling cycle.
#6C4. Vent switch, replacement air - power open, interconnected with exhaust fan, heating cycle and/or cooling cycle.
#7. 24VAC vent switch, combustion air, & replacement air
#7A. 24Vac vent switch, combustion air, & replacement air with two exhaust fans and two individual timers
#8. 24VAC vent switch & replacement air opens during firing
#8A. 24Vac vent switch & replacement air damper Power Open
#8B. 24Vac vent switch with relay, replacement air damper Power Close
#8B1. 24Vac vent switch with relay, replacement air damper Power Close with exhaust fan
#8C. Two Forced Air Furnaces sharing a replacement air supply duct controlled by one fresh air Power Closed Damper
#8C1. Two Forced Air Furnaces sharing a replacement air supply duct controlled by one fresh air Power Open Damper
#8C2. Two Forced Air Furnaces sharing a replacement air supply duct controlled by one fresh air Power Open Damper
#8C3. Two Forced Air Furnaces sharing a replacement air supply duct controlled by one fresh air Power Open Damper
#8C4. Two Forced Air Furnaces sharing a replacement air supply duct controlled by one fresh air Power Open Damper
|
|
Products 