ADP - 1102 - TPX - (120Vac-5A and 24Vac-10A coils with 24Vac switching, Interlocked)

HMI Interface Relay Adaptors

HMI Hoyme ADP- 1102 - TPX

120Vac / 24Vac Interlocking Relay Adaptor Control Center: to control 24Vac ventilation fresh air inlet damper with end switch connected to 120Vac exhaust fan. Damper proves to be open before exhaust fan runs. Also turns on furnace circulation fan. c/w 2 relays: 120Vac and 24Vac. Contacts 10 Amps.

Installation Instructions - Printer friendly (pdf)

Colored Wiring Diagrams used with the ADP-1102-TPX

#11. Vent switch, combustion air, & interlocking replacement air

#12. Vent switch & interlocking replacement air - Power Close Damper

#12B. Vent switch & interlocking replacement air - Power Open Damper

#12C. High volume Kitchen Exhaust fan interconnected to a Forced Air Heating System, replacement air & inlet fan interlocked with a Power Open Damper

#12D. 120 Vac vent switch, Adaptor 1101-05A and replacement air damper, Power Open with High volume Kitchen Exhaust fan interconnected to a Forced Air Heating System, replacement air with inlet fan interlocked with a separate Power Open Damper

#12D1. 120 Vac vent switch, Adaptor 1102-TWP and replacement air damper, Power Open with High volume Kitchen Exhaust fan interconnected to a Forced Air Heating System, replacement air with inlet fan interlocked with a separate Power Open Damper

Last Updated (Tuesday, 24 July 2012 10:15)

"Putting a Damper on Cold Air"

ADP - 1102 - TPX - (120Vac-5A and 24Vac-10A coils with 24Vac switching, Interlocked)