Home Products ADP - Interface Relay Adaptors ...24Vac Coil ADP-0241-05A

ADP - 0241 - 10A - (24Vac coil with 120Vac switching up to 5A or 10A)

HMI Interface Relay Adaptors 


HMI Hoyme ADP- 0241- 10A

This Relay Adaptor may be used as an automatic switch having a 24Vac coil and 120Vac contact points to control a line voltage circuit for up to a 10 amp draw.
i.e. Exhaust Fan. Adaptor can also be used 100% for 24Vac switching (See ADP-1101-05A). Switching 24Vac dampers and thermostat circuits use ADP-0241-05A type only and for 120Vac fan control, use ADP-0241-10A type only.

Installation instructions - Printer friendly (pdf)

Colored Wiring Diagrams used with the ADP-0241-10A

#7A1. 24Vac vent switch, combustion air, & replacement air with two exhaust fans & two individual timers Power Close

#8A1. 24Vac vent controlled by switch & replacement air damper Power Open

#8B1.
24Vac vent switch with relay, replacement air damper Power Close with exhaust fan

#8B3. 24Vac vent controlled by switch & replacement air damper Power Open also during call for heat

ADP-0241-10A

 




Last Updated (Tuesday, 20 September 2016 09:51)