Home

FCPC - Fireplace Chimney Power Cap

  HMI   FCPC - Fireplace Chimney Power Cap  

 

Installation Instructions - PDF printer friendly
Specification Sheet for ordering (pdf)



Fireplace Chimney Cap

Tight Seal Keeps Chimney Warm


This Chimney Cap is custom made to dimensions of the chimney flue. A low voltage wire is strung down the outside of the chimney, through the building wall and connected to a control console. The control console, as part of the kit, is usually placed near the fireplace hearth and plugged into a standard 120 Volt outlet for simple, hassle free control of the Chimney Cap. Features include:

A) - manual release mechanism (ground level) in case of power failure;
B) - end switch to prove the open position by:

 

  • indicator light or
  • interlocking connections.

    Shipping weight: 32 lbs. Installation time: approximately 1.5 hours.

 

Fireplace Chimney Cap - Illustration 1 Illustration 1.
Fireplace Chimney Cap Illustration 2 Illustration 2.
Fireplace Chimney Cap Illustration 3 Illustration 3.
Fireplace Chimney Cap Illustration 4 Illustration 4.
Fireplace Chimney Cap Illustration 5 Illustration 5.
   



Installation Instructions - PDF printer friendly

Specification Sheet for ordering (pdf)

Last Updated (Friday, 16 October 2015 09:51)