Home

ADP - 1102 - TPX - (120Vac-5A and 24Vac-10A coils with 24Vac switching, Interlocked)

HMI  Interface Relay Adaptors

HMI Hoyme ADP- 1102 - TPX

This adaptor acts as a control centre activated by a 120Vac ventilation switch to:
(1) Open a 24Vac fresh air inlet damper equipped  with an  end switch ;
(2) Simultaneously turn on the furnace circulation fan;
(3) Turn on a 120Vac exhaust fan after damper  proves to be open (Interlocked).

Installation Instructions - Printer friendly (pdf)


Colored Wiring Diagrams used with the ADP-1102-TPX
 


#11.
Vent switch, combustion air, & interlocking replacement air

#12.
Vent switch & interlocking replacement air - Power Close Damper

#12B. 
Vent switch & interlocking replacement air - Power Open Damper

#12B3.
 Vent switch & interlocking replacement air - Power Open Damper

#12B4. Vent switch & interlocking replacement air - Power Open Damper

#12C. High volume Kitchen Exhaust fan interconnected to a Forced Air Heating System, replacement air & inlet fan interlocked with a Power Open Damper

#12D. High volume Exhaust fan interconnected to a Forced Air Heating System, replacement air & inlet fan interlocked with a Power Open Damper

#12D1. High volume Exhaust fan interconnected to a Forced Air Heating System, replacement air & inlet fan interlocked with a Power Open Damper   

ADP-1102-TPX

Last Updated (Tuesday, 20 September 2016 11:40)